Chapter 4: UEFI BIOS
141
HTTPS Boot Checks Hostname
matches the host name provided by the remote server. The options are Enabled and Disabled
Priority of HTTP Boot
Instance of Priority 1 (Available when your motherboard supports this feature)
This feature sets the rank target port. The default setting is 1.
Select IPv4 or IPv6
are IPv4 and IPv6.
Boot Description
Use this feature to enter a boot description, which cannot be longer than 75 characters. Please
be suer to enter a boot description; otherwise, the boot option for the URI cannot be created.
Boot URI
determines how IPv4 Boot Option and IPv6 Boot Option will be created. This feature is only
supported on Dual or EFI Boot Mode.
Instance of Priority 2 (Available when your motherboard supports this feature)
This feature sets the rank target port. The default setting is 0.
Intel(R) Ethernet Controller X710 for 10GBASE-T-(MAC address)
Note 1: This feature is available when "Onboard LAN Option ROM Type" is set to EFI.
Note 2: The Ethernet controller and MAC addresses shown above are based on you
Firmware Image Properties
The following information is displayed:
• Option ROM Version
• Unique NVM/EEPROM ID
• NVM Version
To Next Page
Loading...
