Supermicro X13DEG-OA - Page 148

148
Super X13DEG-OA User's Manual
VLAN Conguration (MAC address)
Enter Conguration Menu
VLAN ID
If VLAN Mode is enabled, use this feature to specify the VLAN ID. The valid VLAN ID range
is from 0 to 4049. The default is 0.
Priority
Use this feature to specify the 802.1Q Priority. The valid Priority range is from 0 to 7. The
default is 0.
Add VLAN
Use this feature to create a new VLAN or update exsisting VLAN.
Remove VLAN
Use this feature to remove selected VLAN.
Driver Health
This feature displays the health information of the drivers installed in your system, including
LAN controllers, as detected by the BIOS. Select one and press <Enter> to see the details.
Note:󰀨
depending on the drivers installed in your system. It's also based on your system
