160
Super X13DEG-OA User's Manual
Enter Deployed Mode / Exit Deployed Mode (Available when
"Secure Boot Mode" is set to Custom)
Select Ok to reset system to the User Mode or to the Deployed Mode.
Key Management (Available when "Secure Boot Mode" is set to
Custom)
The following information is displayed.
• Vendor Keys
Provision Factory Defaults
Select Enabled to install provision factory default settings after a platform reset while the
system is in the Setup Mode. The options are Disabled and Enabled.
Restore Factory Keys (Available when any secure keys have been
installed)
Select Yes to restore manufacturer default keys to ensure system security. The options are
Yes and No. Selecting Yes will reset system to the Deployed mode.
Reset To Setup Mode (Available when any secure keys have been
installed)
This feature resets the system to the Setup Mode. The options are Yes and No.
Enroll E Image
Export Secure Boot Variables (Available when a secure key has
been installed)
This feature exports the NVRAM contents of secure boot variables to a storage device.
The options are Yes and No.
Export Secure Boot Variables
The following information is displayed:
Secure Boot variable / Size / Key# / Key Source
To Next Page
Loading...
