3
Important: Important information given to ensure proper system installation or to
relay safety precautions.
Preface
Preface
About This Manual
This manual is written for system integrators, IT technicians, and knowledgeable end users.
It provides information for the installation and use of the X13DEG-OA motherboard.
About This Motherboard
The Supermicro X13DEG-OA supports dual 4th/5th Gen Intel® Xeon® Scalable Processors
(Socket E LGA 4677) with four UPIs (20GT/s max.) and a thermal design power (TDP) up to
350W. Built with the Intel C741 chipset, the X13DEG-OA supports up to 8TB 3DS RDIMM/
RDIMM DDR5 ECC memory with speeds up to 5600MT/s (1DPC) or 4400MT/s (2DPC) in
Note below). This motherboard features superior I/O expandability
I/O module (AIOM) for OCP 3.0 compliant cards, eight SATA 3.0 ports, and a dedicated
provides TPM (Trusted Platform Module) and hardware RoT (Root of Trust) support. The
and GPU support. It is ideal for use in general purpose servers with deep learning and HPC
(High Performance Computing) applications. Please note that this motherboard is intended
to be installed and serviced by professional technicians only. For processor/memory updates,
please refer to our website at https://www.supermicro.com/en/products/motherboards.
Note: Memory speed support depends on the processors used in the system. The
4th Gen Intel Xeon Scalable processors support DDR5 memory with speeds up to
Scalable processors support DDR5 memory with speeds up to 5600MT/s (or up to
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
Warning! Indicates you may encounter high voltage while performing a task.
Warning! Indicates important information given to prevent equipment/property damage
Note: Additional Information given to provide information for proper system setup.
To Next Page
Loading...
