Supermicro X13DEG-OA - Page 50

50
Super X13DEG-OA User's Manual
Removing the PHM from the CPU Socket
Before removing the PHM from the motherboard, be sure to shut down the system and unplug
the power cables from the power supply. Then follow the steps below:
1. Use a T30 bit driver to loosen the four PEEK nuts on the heatsink in the sequence of A,
B, C, and D.
A
B
C
D
A
B
C
D
A
B
C
D
1U Heatsink
2U Heatsink
4U Heatsink