Supermicro X13DEG-OA - Page 53

53
Chapter 2: Installation
Removing the CPU Carrier Assembly from the PHM
To remove the CPU carrier assembly from the PHM, please follow the steps below:
1. Detach the four plastic clips (marked a, b, c, d) on the CPU carrier assembly from the
four corners of the heatsink (marked A, B, C, D) as shown in the drawings below.
Pin 1
a
c
b
d
A
C
D
B
Pin 1
a
c
b
d
A
C
D
B
1U Heatsink (View of Component Side & Heatsink Bottom Side)
Pin 1
a
c
b
d
A
C
D
B
Pin 1
a
c
b
d
A
C
D
B
Pin 1
a
c
b
d
A
C
D
B
Pin 1
a
c
b
d
A
C
D
B
2U Heatsink (View of Component Side & Heatsink Bottom Side)
SP XCC
Max Series (HBM)
SP MCC
SP XCC
Max Series (HBM)
SP MCC