57
Chapter 2: Installation
Removing the Processor from the CPU Carrier Assembly
Once you have removed the CPU carrier assembly from the PHM, you are ready to remove
the processor from the CPU carrier by following the steps below.
1. Unlock the lever from its locked position and push the lever upwards to disengage the
processor from the CPU carrier as shown in the drawing on the right below.
2. Once the processor is loosened from the carrier, carefully remove the processor from
the CPU carrier.
Note: Please handle the processor with care to avoid damaging the processor and
its pins.
Lever
CPU Carrier Assembly (carrier E1A)
CPU Carrier Assembly (carrier E1B)
Lever
SP XCC
Max Series (HBM)
SP MCC
To Next Page
Loading...
