Supermicro X13SWA-TF - Led Indicators; DIMM Memory Installation; Memory Population Guidelines

ContaCt InformatIon
• www.supermicro.com (Email: support@supermicro.com)
• Manuals: https://www.supermicro.com/support/manuals
• Drivers & Utilities: https://www.supermicro.com/wdl/driver/
• Safety: https://www.supermicro.com/about/policies/safety_information.cfm
LED Indicators
LED Description Color/State
BMC LED BMC Heartbeat LED Blinking Green: BMC Normal
LED1 Onboard Power LED Solid Green: Power On
LED3, LED5, LED6, LED7 M.2 LEDs for M.2-C01/M.2-C02/M.2-C03/M.2-C04 Blinking Green: Device Working
LED4 Unit Identier (UID) LED Blue On: Unit Identied
LED8 Status Code LED Digital Readout
CPU and Memory Support
LED Indicators
The X13SWA-TF motherboard supports a single Intel Xeon W-3400 (112L)/ W-2400 (64L) series processor in Socket E1 LGA4677.
• For Intel Xeon W-3400 series processors (112L): support up to 1TB of ECC RDIMM and 4TB of 3DS RDIMM with speeds of up to
4800 MT/s (1DPC) and 4400 MT/s (2DPC) in 16 ECC DDR5 (288-pin) SMD DIMM slots.
• For Intel Xeon W-2400 series processors (64L): support up to 512GB of ECC RDIMM and 2TB of 3DS RDIMM with speeds of up to
4800 MT/s (1DPC) and 4400 MT/s (2DPC) in eight ECC DDR5 (288-pin) SMD DIMM slots (DIMMA1/2, DIMMB1/2, DIMME1/2, and
DIMMF1/2).
Populating these DIMM slots with a pair of memory modules of the same type and size will result in interleaved memory, which will
improve memory performance.
Notes: 1) For memory optimization, use only DIMM modules that have been validated by Supermicro. For the latest memory updates,
please refer to our website at https://www.supermicro.com/products/motherboard.
2) Always connect the power cord last, and always remove it before adding, removing, or changing any hardware components.
Memory Population Guidelines
• It is recommended to use DDR5 DIMM models of the same size, type, and speed.
• Mixed DIMM speeds can be installed. However, all DIMMs will run at the speed of the slowest DIMM.
• In a given channel, the black slot can be enabled only when the gray slot is populated rst.
DIMM Memory Installation
Towards the CPU
(Gray Slot) DIMME1
(Black Slot) DIMME2
(Gray Slot) DIMMF1
(Black Slot) DIMMF2
(Gray Slot) DIMMG1
(Black Slot) DIMMG2
(Gray Slot) DIMMH1
(Black Slot) DIMMH2
(Black Slot) DIMMD2
(Gray Slot) DIMMD1
(Black Slot) DIMMC2
(Gray Slot) DIMMC1
(Black Slot) DIMMB2
(Gray Slot) DIMMB1
(Black Slot) DIMMA2
(Gray Slot) DIMMA1
Towards the CPU