Supero SC813 Series User Manual

2-5
Chapter 2: Installation Procedures
D. Installing the Chassis into the Rack
Procedures
1. Push the inner slides, which are attached to the chassis, into the grooves
of the outer slide assemblies that are installed in the rack as shown below:
2. Push the chassis all the way to the back of the outer slide assemblies as
shown below: (The plastic bezel is not included in the package.)
Inner slides
Grooves of the outer
slide assemblies
Push the chassis into the
back of the outer slide as-
semblies

Supero SC813 Series Specifications

General

Brand	Supero
Model	SC813 Series
Category	Chassis
Language	English