Supero X10SLL-F User Manual

D-2
X10SLM-F/X10SLL-F/X10SLL-SF/X10SLL-S User’s Manual
D-2 Steps to Reboot the System by Using Jumper JBR1
1. Power down the system.
2. Close pins 2-3 on Jumper JBR1, and power on the system.
3. Follow the BIOS recovery SOP listed in the previous chapter (Appendix C).
4. After completing the steps above, power down the system.
5. Close pins 1-2 on Jumper JBR1, and power on the system.

Supero X10SLL-F Specifications

General

Brand	Supero
Model	X10SLL-F
Category	Motherboard
Language	English