Chapter 4: AMI BIOS
4-19
•SPS Version
•ME FW (Firmware) Status Value
•ME FW State
•ME FW Operation State
•ME FW Error Code
•ME NM FW Status Value
•BIOS Booting Mode
•Cores Disabled
•ME FW SKU Information
•End-of-POST Status
Super IO Conguration
Super IO Chip NCT6776F
Serial Port 1 Conguration
Serial Port
Select Enabled to enable the onboard serial port. The options are Enabled and
Disabled.
Change Port 1 Settings
This feature species the base I/O port address and the Interrupt Request ad-
dress of Serial Port 1. Select Auto to let the BIOS automatically assign the base
I/O and IRQ address. The options for Serial Port 1 are Auto, (IO=3F8h; IRQ=4),
(IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10,
11, 12), (IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12) and (IO=2E8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12).
Serial Port 2 Conguration
SOL Serial Port
Select Enabled to use Serial Port 2 as a SOL (Serial_Over_LAN) Serial Port for
remote console support. The options are Enabled and Disabled.
To Next Page
Loading...
Need help?
General
