4-14
X9DRL-3F/X9DRL-iF User’s Manual
Port 0~Port 5 Hot Plug
Select Enabled to enable hot-plug support for a port specied by the user
so that the user is allowed to change a hardware component or a device
without shutting down the system. The options are Enabled and Disabled.
Staggered Spin-up
Select Enabled to enable Staggered Spin-up support to prevent excessive
power consumption caused by multiple HDDs spinning-up simultaneously.
The options are Enabled and Disabled.
RAID Mode
The following items are displayed when RAID Mode is selected:
PCH RAID CodeBase
This item species the codebase to be used for RAID support. The only
option is Intel.
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for a port specied by the user.
The options are Enabled and Disabled.
SCU(StorageControllerUnit)Conguration
Storage Controller Unit
Select Enabled to enable PCH SCU storage devices. The options are Disabled
and Enabled.
OnChip SCU Option ROM
Select Enabled to support the onboard SCU Option ROM to boot up the system via
a storage device. The options are Disabled and Enabled.
SCU Port 0~7
The SCU devices detected by the BIOS will be displayed.
PCIe/PCI/PnPConguration
This submenu allows the user to congure the following PCIe/PCI/PnP settings.
To Next Page
Loading...
Need help?
General
