of this back section.
b. When “rimless” or “bevel” of LE-320/400/420 is selected,
you can also select polishing or not polishing functions(Fig
7 and Fig. 8)
When select the “rimless” of LE-300/310, it will process
rimless lens polishing.If you do not want polishing, press
“STOP” after the second edger of lens and then the machine
will come back to the beginning position.(Fig.7A)
NOTE:
1.When LE-320/400/420 is polishing with “rimless” or
“bevel”，you can choose to turn on the light upside of the
button “POLISHING”,the machine will come back to the
beginning position after finishing edging.
2.When the machine is not polishing while “rimless” or
“bevel”,you can chose to turn on the light under the button
“POLISHING”. The machine will come back to the beginning
position after finishing edging.
G. Start
To Next Page
Loading...
