Need help?Do you have a question about the suprema BioStation T2 and is the answer not in the manual?
Lists the basic parts included in the BioStation T2 package.
Overview of various authentication methods supported by BioStation T2.
Guidance on mounting the BioStation T2 device on a wall.
Details pin assignments and types for various device cables.
Instructions for connecting power, USB, Ethernet, and other peripherals.
Details different user authentication methods like fingerprint, card, and PIN.
Process for setting up the initial administrator account.
Steps to access and navigate the Admin Menu.
General workflow for enrolling new users.
Detailed steps for enrolling user information, fingerprints, and cards.
Configuration of TCP/IP settings for network connectivity.
Steps to configure the BioStar server connection settings.
General settings for user authentication modes.
Setup for Time & Attendance operational modes.
General device settings and configurations.
Fine-tuning the fingerprint scanner's sensitivity and modes.
Settings for door control, relays, and sensors.
Detailed technical specifications of the BioStation T2 device.
General| Category | Touch Terminals |
|---|---|
| Ethernet | 10/100 Mbps |
| Wi-Fi | Optional |
| Operating System | Linux |
| Power Supply | 12V DC |
| Ingress Protection Rating | IP65 |
| Display | 3.5" TFT LCD |
| Fingerprint Sensor | Optical Sensor |
| Log Capacity | 100, 000 |
| RF Card Options | MIFARE, DESFire, NFC |
| Card Capacity | 10, 000 |
| Communication | TCP/IP, RS-485 |
| Relay | 1 Relay |
| USB | USB 2.0 (Host) |
| Operating Temperature | -20°C to 50°C |
| Operating Humidity | 0% to 80% |
| Authentication Methods | Fingerprint, card, Password |
To Next Page
