3. . Multi-Device Inside Patch Antenna
4. 12V DC Power
Step 1: Attach Outside Antenna to the Vehicle’s Roof
Attach the Outside Antenna to the roof of your vehicle and at least 12-inches away from obstructions and other radiating elements,
like other antennas.
Suggestion: For non-metal or non-magnetic vehicle surfaces use the optional adhesive tape.
Next, run the cable from the outside antenna across the car’s roof and into the car. To hide and protect the antenna cable, carefully
pull down the door seal, run cable underneath it and push the seal back into place. Run the cable to the inside of the vehicle near
the planned location of the booster (under the seat of the vehicle, or in the front or middle console).
Note: The outside antenna must not be collocated or operating with any other antenna or booster.
To Next Page
Loading...
