SureCall Fusion2GO 3.0 RV User Manual

User Guide
Fusion2GO 3.0 RV
All-Carrier RV Cellular Signal Booster Kit
™
www.SureCall.com | 888.365.6283 | support@surecall.com

SureCall Fusion2GO 3.0 RV Specifications

General

Type	Car cellular signal booster
Impedance	50 Ω
Uplink gain	50 dB
Data network	CDMA, EDGE, EVDO, GSM, HSPA+, LTE, WCDMA
Noise figure	5 dB
Downlink gain	29 dB
Uplink frequency range	698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 MHz
Downlink frequency range	728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 MHz
Input voltage	6 - 15 V
Power source type	Cigar lighter
Power consumption (typical)	10 W

Weight and Dimensions

Depth	101.6 mm
Width	127 mm
Height	25.4 mm
Weight	453 g

Summary

How It Works

Package Contents

Installation

Step 1: Mount Outside Antenna

Instructions for assembling the L-Bracket and mounting the outside antenna using U-bolts and cable.

Step 2: Install the Signal Booster

Connect the inside whip antenna and route the cable from the outside antenna to the booster.

Step 3: Connect Power

Connect the DC power adapter to the booster and plug it into a power outlet. The Power LED will light.

LED Indicators

Information on LED status, including red LEDs indicating potential interference or signal issues.

Troubleshooting

Specifications

Antenna Kitting Information

Details on antenna gain and product numbers for different configurations, including vehicle and marine.

Consumer Guidelines

Warranty

Three-Year Product Warranty

Details the three-year warranty period, conditions for returns, and limitations of liability.