To Next PageTo Next Page
Need help?Do you have a question about the SureCall Flare 3.0 and is the answer not in the manual?
Provides critical warnings regarding FCC regulations, unauthorized modifications, and antenna collocation.
Guide on locating the area with the best signal strength for optimal outdoor antenna placement.
Details the required vertical and horizontal separation between antennas for optimal performance.
Details finding the optimal outdoor location with the strongest signal for antenna placement.
Guides on mounting the outdoor antenna, including separation and orientation requirements.
Guidance on positioning the booster indoors for optimal signal distribution.
Instructions for connecting the booster to the power source and outlet.
Describes how to test the installed system and make adjustments for peak performance.
Provides critical safety notes regarding booster operation, storage, and voltage requirements.
General| Uplink Frequency Range | 698-716 / 776-787 / 824-849 / 1710-1755 / 1850-1915 MHz |
|---|---|
| Max Gain | 72 dB |
| Noise Figure | 5 dB |
| Impedance | 50 Ohms |
| Outside Antenna | Omni-directional |
| Max Output Power | 1 Watt EIRP |
| Frequency Bands | 700 MHz, 850 MHz, 1900 MHz |
| Downlink Frequency Range | 869-894 MHz, 2110-2155 MHz |
| Power Consumption | 10W |
| Connectors | SMA |
| Type | Booster |
| Bands Supported | 4G LTE, 3G, 2G |
| Inside Antenna | Integrated |
| Carrier Compatibility | Verizon, AT&T, T-Mobile, Sprint |
