What to do if SureCall Flare Extender has no signal after installation?
If your SureCall Extender system shows no signal or reception after installation, first ensure that all cable connections are securely attached to both the booster and the antenna. Then, try increasing the distance between the booster and the antenna. Finally, confirm that there is a usable signal at the antenna's location.
What to do if Automatic Gain Control (AGC) is preventing oscillation in my SureCall Antenna?
If the Automatic Gain Control is preventing oscillation, increase the separation between the outside antenna and the booster to optimize performance. Also, increased separation between the outside antenna and the Flare booster may be needed to continue proper operation.
How to troubleshoot SureCall Flare when the signal booster has no power?
If your SureCall Extender signal booster has no power, connect the power supply to a different power source, ensuring it's not controlled by a switch. Check the green POWER LED on the booster; if it's off, return the power supply to SureCall. Contact tech support to receive an RMA.
Guide to finding the strongest cellular signal outside using phone features or apps for optimal booster placement.
Instructions for mounting the outdoor antenna, covering Omni and Yagi types and placement guidelines.
Guidance on positioning the signal booster indoors for optimal coverage within the desired area.
Steps to connect the signal booster and its power supply to an electrical outlet.
How to confirm the signal booster is working by placing a call and checking signal strength.
Explains the meaning of different LED colors and flashing patterns on the booster for status indication.
Provides contact information for support and common problem resolutions for the signal booster.
Regulatory information regarding FCC and Industry Canada compliance for the device, including registration requirements.
Specific compliance requirements for Canada, including interference regulations and operating conditions.
Details on the manufacturer's three-year warranty and activation process via online registration.
Legal disclaimers and limitations on warranty coverage, damages, and overall liability for the product.
General| Type | Cell Phone Signal Booster |
|---|---|
| Uplink Frequency Range | 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 MHz |
| Downlink Frequency Range | 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 MHz |
| Maximum Gain | 65 dB |
| Impedance | 50 Ohms |
| Frequency Bands | B12, B13, B5, B2, B4 |
| Noise Figure | 5 dB |
| Output Power | 1 Watt EIRP |
| Compatibility | All US carriers |
| Power Requirements | 5V DC |
| Antennas | Omni-directional |
To Next Page
