CHANGING THE LAMP
1. Remove the Flashlight Bezel from the
Flashlight Body by holding the Body and ro-
tating the Head counterclockwise (as viewed
from the front of the Flashlight) until it is free
of the Body.
2. Remove the Lamp/ Reflector and replace
with the desired Lamp/Reflector.
Avoid touching the inside of the Lamp en-
velope or Reflector as this will degrade the
performance of your Sure-Fire Light.
3. Install the Bezel back on to the Body.
BEZEL
FLASHLIGHT BODY
LAMP/REFLECTOR
To Next Page
Loading...
