12
How to remove the lid guides for cleaning
To replace the lid, follow steps 3 to 5 on page 11.
To replace the lid guides repeat the process but in
reverse. Make sure that you hook them in at the front
first and then attach the back.
Hold one of the lid guides near the rear and pull it
upwards until you are able to unhook the front section.
You will need to pull it hard! Then do the same to
remove the second lid guide.
The lid guides are marked with a small L (le) or R
(right) near the rear to indicate which side each one
fits back into. Make sure to fit them into their correct
sides.
Hand wash the lid guides. Do not put them in the
dishwasher.
1
2
3
4
Firstly, you’ll need to remove the Pet Bowl’s lid. Press
the Manual Open/Close button and then, once the lid is
open, pull it upwards.
The lid guides on the Sealed Pet Bowl are critical parts which allow the lid to open
and close correctly. Both lid guides must be re-attached aer cleaning.
To Next Page
Loading...
