4.0 BATTERY CHARGING & CONNECTION
The MGI Ai Navigator GPS
+
can only be used with the:
• MGI 24v 380Wh Lithium battery.
4.1 BATTERY CHARGER
• Before using your MGI Ai Navigator GPS
+
for the first time you must
fully charge the battery overnight.
• Plug the charger AC Lead into a power point. The green LED
indicates the battery is fully charged whereas the red LED indicates
it is not fully charged
• Li the charging cover flap on the side of the battery then insert
the charger lead ensuring the small semi-circle is facing upwards.
• The battery can be le on charge until next use. Please refer to the
battery charger user manual for further information.
4.2 CONNECTING THE BATTERY ONTO THE NAVIGATOR GPS
+
Position the battery on the Ai Navigator GPS
+
with the Red indicator
switch placed closest to the Handle. Connect the battery by sliding
the ON/OFF switch until the green indicator is displayed".
TIP: When this on/o button is used it will erase any on game
information if you are within a Round. Alternatively use the SLEEP
mode which maintains all current game information.
MGI Ai NAVIGATOR GPS
+
User Manual 1.0 12