EasyManua.ls Logo

Suunto DX - Battery Replacement

Suunto DX
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
avoid subjecting the device to rapid air and water temperature
changes.
always clean your device with fresh water if subjected to salt
water.
never knock or drop the device.
4.3 Battery replacement
Suunto DX displays a battery symbol as a warning when the power
gets too low. When this happens, your Suunto DX should not be
used for diving until the battery has been replaced.
Contact an authorized Suunto service center for battery
replacement. It is imperative that the change is made in a proper
manner to avoid any leakage of water into the battery
compartment or computer.
Defects caused by improper battery installation are not covered by
the warranty.
All history and logbook data, as well as the altitude, personal and
alarm settings, remain in the dive computer memory after the
battery change. Other settings revert back to default values.
76

Other manuals for Suunto DX

Related product manuals