Suunto Vyper - 3.4. GAUGE MODE

31
3.4. GAUGE MODE
If set to GAUGE Mode, the dive computer can be
used for diving with TRIMIX or other technical div-
ing gas mixes. If you are educated for technical diving
and you plan to make these kind of dives, it is recom-
mended that you set the instrument permanently to its
GAUGE Mode (see chapter 4.3. “Set Modes”).
This mode can also be used for other purposes like
snorkeling, free diving, depth measurements etc.
If set to GAUGE Mode the text GAUGE is shown
after activation (Fig. 3.3). In the GAUGE Mode the
present depth, maximum depth, dive time, time of
day, temperature, and ascent rate indicator are shown
during the dive (Fig. 3.26).
NOTE! After a dive, the no-fl ying time is always
set to 48 hours. During that period it is not possible
to change the dive computer mode.
Fig. 3.26 Diving with the
GAUGE Mode.
m
° C
MAX
DIVE TIME