Status I Traction Adiuster
The status adjuster (right and left side) allows you to selectively adjust the
position of your InstaTrike wheels in order to customize ride, handling, level, and
traction characteristics. Your InstaTrike is shipped with the status adjuster
preset to an optimum position for your model of motorcycle however you can
make whatever adjustments necessary to customize to your personal
preference.
As a rule -
Shortening the status adjuster arm raises the InstaTrike wheels and places
more of the weight of your motorcycle on the motorcycle wheel. This increases
motorcycle traction and gives a generally softer ride.
Lengthening the status adjuster arm lowers the InstaTrike wheels and places
more of the weight of your motorcycle on the InstaTrike wheels. This gives a
firmer ride and increases handling/cornering.
To change status adjuster arm length -
1) Loosen jam nuts
2) Adjust arm length by loosening and turning flange nut C and/or hex nut D
3) After desired adjustment tighten nut C and D and jam nuts.
4) If necessary the pivot bolt and bolts A and B can be loosened for adjustment.
Be certain to retighten all bolts after adjustment.
NOTICE: Check all bolts and nuts periodically for tightness
NOTICE: Be sure motorcycle is level after adjustment.
Flange Nut C
To Next Page
Loading...
