Leanstop Braces
. When installing InstaTrike, bolt leanstop brace to receiver hitch by
inserting bolt from bottom through the leanstop brace and
washers/spacers. Thread bolt into bracket on hitch and tighten.
. When removing InstaTrike reverse the above procedure.
. Adding or removing washers/spacers between receiver hitch and
leanstop brace will allow you to level your motorcycle if necessary.
Insta Trike Frame
(cross section)
i
UP
Receiver Hitch
(cross section)
Frame b~lt inserts
fromBOTTOM
Hitch b~lt inserts
fromBOTTOM
Leanstop Brace
Leanstop brace is slotted to allow for proper alignment with bolt holes
NOTICE:
Be certain that hitch bolts are inserted from the BOTTOM
To Next Page
Loading...
