INSTALLATIONOF THE TOW-PACHITCH CART.
1.Place your motorcycle on a smooth level surface and attach
levelingjack stands.
2. Assemble axles and wheels onto the tow-pac hitch cart.
3. Push the hitch mount into the receiver hitch. (this might be a
little difficult until you get use to doing it. Removing the paint
from the hitch mount and applying a little grease will help.)
4. Place the hitch pin through the receiver hitch and hitch mount
(alignmentplate). Install and tighten the tension bolt.
5. Align Insta Trike wheels. (initialinstallationonly. Checkperiodicallyand
realign if necessary)
6. Bolt leanstop braces to hitch. (Bolt inserts from the bottom) Be
certain to replace washers/spacers in the same configuration as
when you removed them.
7. Remove levelingjack stands.
8. Check all bolts for tightness.
9. You are now ready for the test ride.
A. Keep your feet up!
B. Ride slowly in fITstgear until you are comfortable with the
Tow-Pac system.
To Next Page
Loading...
