Receiver Hitch Installation
Install all bolts loosely until all brackets are in place.
Tighten all bolts after all brackets are in place.
1) Place motorcycle on a smooth level surface on its side stand.
2) Attach Bracket A (left) B (right) to motorcycle using new bolt provided. Place
washer between bracket and motorcvcle.
3) Attach brackets C (left) D (right) to two rear fender mounting bolts. Use
new bolts and spacers provided. Spacers mount between bracket and chrome
rail. Remove saddle bags and remount them on over brackets C/D if applicable.
.or. - -- -- ----
~.~
4) Attach brackets E (left) F (right) to the outside of the rear hole on brackets
C and D.
5)
6)
Attach rear arms of bracket AlB to the bottom of the forward hitch arms
Attach bottom of brackets E and F to top of rear hitch plate
7)
Be sure hitch is straight on motorcycle and tighten all bolts.
To Next Page
Loading...
