7-19
4. Remove the bolts and CVT fil-
ter 4.
5. Inspect the CVT filter for dam-
age and dirt. If any defects are
found, the CVT filter must be
replaced.
ENGINE COOLANT
Coolant Level
The coolant should be kept
between the “F” (FULL) and the
“L” (LOW) level lines in the reser-
voir tank at all times. Inspect the
level every time before riding with
the motorcycle held vertically. If
the coolant is found lower than the
“L” level line, add specified engine
coolant through the filler hole until
it reaches the “F” line.
NOTE:
• Check the coolant level when
the engine is cold.
• If the engine coolant reservoir
is empty, check the radiator
coolant level.
F
L
To Next Page
Loading...
