2-38
BEFORE DRIVING
84MM6-01E
Install the ISOFIX type child restraint sys-
tem according to the instructions provided
by the child restraint system manufacturer.
After installing, try moving the child
restraint system in all directions especially
forward to make sure the connecting bars
are securely latched to the anchorages.
84MM00252
Your vehicle is equipped with the top tether
anchorages, be sure to use the top tether
strap of the child restraint according to the
instructions provided by the child restraint
system manufacturer.
Here is a general instruction:
1) Remove the head restraints.
NOTE:
Stow the removed head restraint in the lug-
gage compartment so it will not inconve-
nience the occupants.
84MM00253
2) Place the child restraint in the rear seat,
inserting the connecting bars to the
anchorages between the seat cushion
and the seatback.
68LM268
3) Use your hands to carefully align the
connecting bar tips with the anchor-
ages. Take care not to pinch your fin-
gers.
54G184
NOTICE
Before installing a child restraint sys-
tem in the rear seat, remove the head
restraints.
To Next Page
