16
If the key-fob battery runs low, the red CHECK
ENGINE lamp will flash.
CAUTION
Do not expose Hand Unit to excessive heat
such as from sunlight or fire.
NOTICE
To prevent damage to the key-fob, be careful
when replacing the battery.
• Install the lithium disc-type battery with the
electrodes facing the proper direction.
• Do NOT touch the internal circuit of the key-
fob when replacing the battery.
To replace the key-fob battery:
1. Insert a flat blade screwdriver in the slot of
the key-fob and remove the cover.
2. Remove the O-ring 1.
NOTE:
The O-ring may be fitted on the cover side.
NOTICE
If the O-ring is damaged, the waterproof per-
formance deteriorates, which can cause the
key-fob to malfunction.
Be careful not to damage the O-ring when
removing it.
To Next Page
Loading...
