32
If not equipped with Keyless Start System:
Turn the Ignition key to the “ON” position.
NOTE:
When the ignition key is ON and the engine
inactivated, buzzer continues sounding.
2. Pull out the emergency stop switch lock
plate 1.
3. Pull up the emergency stop switch knob 2
three times in 10 seconds. A short beep will
be heard if the cancellation is successfully
finished.
4. If equipped with Keyless Start System:
Turn the main switch to the “ON & OFF”
position and then release it to the “PUSH
START/STOP” position to turn the Keyless
Start System to OFF state.
NOTE:
The Keyless Start System can also be turned to
OFF state by pressing the lock button on the
key-fob.
If not equipped with Keyless Start System:
Turn the Ignition key to the “OFF” position.
5. Set the plate 1 in the original position.
NOTE:
• Canceling of the system activation is possible
regardless of whether or not the engine oil
has been replaced. Once the system has
operated, however, Suzuki strongly recom-
mends that the engine oil be replaced before
canceling the system activation.
• Even if the engine oil has been replaced with
the system not operating, it is still necessary
to perform the cancellation.
ON & OFF ON & OFF
PUSH
START
STOP
PUSH
START
STOP
To Next Page
Loading...
