What to do if Suzuki Engine idles unstably?
If the Suzuki Engine idles unstably or stalls, inspect the fuel hose for kinks or pinch points and correct as necessary. Also, the spark plug may be fouled, so clean or replace it.
General| Starting System | Manual or Electric |
|---|---|
| Ignition System | Digital CDI |
| Fuel Delivery System | Electronic Fuel Injection |
| Number of Cylinders | 2 |
| Gear Ratio | 2.08:1 |
| Shaft Length | 381 mm (15 in), 508 mm (20 in) |
| Steering | Tiller or Remote |
| Trim Method | Manual |
| Max Output | 11.0 kW |
| Full Throttle RPM Range | 5, 000 - 6, 000 |
| Fuel Tank Capacity | 12 L |
| Oil Capacity | 1.0 L |
| Engine Type | 4-stroke, SOHC |
| Displacement | 327 cc |
Explains the meaning of signal words (WARNING, CAUTION, NOTICE, NOTE) and a symbol.
Provides critical safety advice for owners regarding operation and preparedness.
Guidelines for gasoline, ethanol blends, and octane ratings.
How to identify fuel blends at the pump.
Advises on proper fuel storage and use of fresh gasoline to prevent degradation.
Warns about potential paint damage from alcohol fuels and proper fuel tank use.
Emphasizes the importance of oil quality and recommends specific oils.
Specifies the recommended type of gear oil for the motor.
Explains how to understand safety labels on the motor and fuel tank.
Defines common symbols used on safety labels for clarity.
Precautions for storing and handling the fuel tank, including flammability.
Warnings about extreme flammability and health hazards of fuel.
Illustrates and labels components of the remote control box.
Illustrates and labels components of the fuel tank.
Importance of transom height and anti-cavitation plate position for performance.
Hazards of overpowering boats and recommendations for professional installation.
Risks of improper motor securing and recommendations for remote control installation.
Specifies the minimum battery requirements for electric starter models.
Recommendations for battery case, connections, and terminal caps.
Warnings about battery acid, flammable gases, short circuits, and proper handling.
Advice on connecting electrical accessories to the boat's battery.
Explains the function of the battery charge cutout system when voltage is low.
Importance of matching propeller to boat and engine for optimal performance.
Step-by-step instructions for installing a propeller, including safety.
Procedure for adjusting trim angle on specific tiller handle models.
How to adjust steering tension for smooth operation on different models.
Explains how trim angle affects steering stability and boat handling.
Adjusting throttle control grip and remote control handle tension.
Explains the purpose of caution systems and warnings about relying on them.
Function of the over-revolution caution system and reset procedure.
Operation of the oil pressure caution system and its effects on engine speed.
How the overheat caution system activates and troubleshooting steps.
How the self-diagnostic system warns of abnormal conditions.
System activation and cancellation procedures for oil change reminders.
Explanation of the "Lock" and "Release" positions of the tilt lock lever.
Procedure to cancel the oil change reminder for remote control models.
How to use the tilt up lock arm to hold the motor in a tilted position.
Steps for lowering the motor after it has been tilted up.
Procedure for setting the motor to shallow water position.
Warnings and precautions for operating in shallow water.
Instructions for tilting the motor up and down using the power tilt switch.
How to tilt the motor manually if power tilt fails.
How to use the tilt up lock knob for stationary engine support.
Key inspection points before starting a trip, including fuel and oil levels.
Step-by-step guide to checking the engine oil level correctly.
Instructions for filling the engine with the recommended oil.
Guidelines for the break-in period, including warm-up and speed limits.
Checks to perform before attempting to start the engine.
Procedure to open the fuel tank vent screw.
Importance of tilt lock position and neutral gear for starting.
Safety precautions for attaching and using the emergency stop switch.
Priming the fuel line and ensuring the throttle is closed before starting.
Step-by-step starting instructions for recoil and electric starter models.
Warnings related to battery cable connections and starter system usage.
Steps for starting the engine using the remote control.
Verifying caution system function during starting.
Importance of checking for water spray from the pilot hole after starting.
Steps for starting the engine in an emergency.
Steps to prepare the motor for emergency starting when the recoil starter fails.
Steps for removing the recoil starter and preparing the emergency rope.
How to shift gears using the tiller handle control grip and shift lever.
Warnings about reinstalling parts and keeping hands away from moving parts.
How to shift and control speed using the remote control handle.
Steps for stopping the engine safely using the stop button or emergency switch.
Disconnecting fuel lines and closing fuel tank vents after stopping the engine.
Guidelines for mooring the boat and preventing unauthorized use.
Procedure for setting the motor to shallow water position.
Risks associated with shallow water operation, including tilt lock and hitting bottom.
Operating in shallow water for power tilt models, including tilt limits.
Procedures for operating in salt water and freezing conditions.
Steps for draining gasoline from the fuel line before motor removal.
Steps for physically detaching and removing the motor from the transom.
Guidelines for transporting the motor vertically or horizontally.
Warnings about fuel hazards and preventing motor damage during transport.
How to position the motor for trailering and using support devices.
Warnings against using the tilt lock arm/knob while trailering.
Chart detailing service intervals for various motor components.
Emphasizes the importance of maintenance and risks of improper service.
Lists the items included in the outboard motor's tool kit.
Information on the correct spark plug type and installation torque/angle.
Procedures for cleaning, adjusting, and checking spark plug condition.
Importance of inspecting breather and fuel lines for damage and leaks.
Detailed steps for draining, filling, and checking engine oil.
Safety warnings and cautions related to engine oil procedures.
How to check engine oil level and guidelines for used oil disposal.
Procedures for checking and changing the gear oil.
Warnings about gear oil hazards and indicators of water contamination.
Chart identifying lubrication points and recommended lubricants.
Purpose of anodes for corrosion protection and inspection frequency.
Warnings and tips for maintaining anodes effectively.
Purpose and periodic checking of bonding wires for damage.
Warnings regarding battery acid, short circuits, and handling precautions.
Maintenance intervals for oil filters, fuel filters, and timing belts.
Procedures and safety precautions for flushing the motor's water passages.
Steps for flushing the water passages with the engine running.
Steps for flushing the water passages with the engine not running.
Flushing procedure when the motor is in the full tilt up position.
Steps for recovering and servicing a motor that has been submerged in water.
Steps for preparing the motor for long-term storage.
Recommends professional overhaul for submerged motors.
Procedures for preparing the motor after it has been stored.
Lists common problems like starter failure and engine not starting.
Troubleshooting for unstable idling, low power, vibration, and overheating.
How to inspect, replace, and the importance of using correct fuses.
Details engine type, displacement, output, and operating ranges.
Sound pressure levels and vibration standards related to EC directives.
To Next Page
