39
To start the engine when the recoil starter
fails:
1. Shift the motor into “NEUTRAL”.
2. Remove the motor cover by turning the lock
lever in the direction of the arrow and lifting
the cover off.
WARNING
When you use the emergency starting proce-
dure, the start-in-gear protection system will
not work. If the shift lever is not in the “NEU-
TRAL” position, the boat can start off unex-
pectedly when the engine is started, throwing
occupants or causing an accident.
Make sure that the shift lever is in the “NEU-
TRAL” position before attempting to start the
motor using the emergency starting proce-
dure.
3. Remove the NSI cable 1 from the recoil
starter.
4. Pull the breather hose 2 out from hose
clamp on the recoil starter.
5. Disconnect the evaporation hose 3 from the
vapor separator.
To Next Page
Loading...
