38
OPERATION
BEFORE ATTEMPTING TO START THE
ENGINE
1. The motor has been lowered into the water.
2. The fuel hose is securely connected to the
fuel tank and the motor.
3. Twist the air-vent screw 1 on the fuel tank
cap counterclockwise to open the vent.
4. Set the release lever 2 to the “Lock” posi-
tion. (DF25A/25AR/30A/30AQ)
DF25A/25AR/30ADF25A/25AR/30A
5. Make sure that the motor is in “NEUTRAL”.
6. The lock plate is in place and the end of the
emergency stop switch cord is attached to a
part of your body.
NOTICE
When the motor is in gear, the recoil starter
cannot be operated and attempting to use it
can damage the recoil starter.
Make sure that the motor is in “NEUTRAL”
before pulling the recoil starter rope.
To Next Page
Loading...
