Suzuki DR600S - Page 105

4-5 FUEL AND LUBRICATION SYSTEM
e Remove the accelerating plunger and spring.
@® Accelerating nozzle
e@ Remove the main jet @ (Needle jet), pilot jet
@ and needle valve @).
e Remove the needle jet from the bore side.
@
Remove
the
starting
plunger
assembly.
INSPECTION
Check
following
items
for
any
damage
or
clogging.
Pilot
jet
Main jet
Main air jet
Pilot air jet
Needle
jet
air
bleeding
hole
Float
Needle valve
Starter jet
*
*
*
*
*
Gasket
Throttle shaft oil seal
Drain plug gasket
Pilot outlet and bypass holes
Accelerating nozzle