Need help?Do you have a question about the Suzuki DR650S and is the answer not in the manual?
General| Displacement | 644 cc |
|---|---|
| Bore x Stroke | 100.0 mm x 82.0 mm |
| Compression Ratio | 9.5:1 |
| Ignition | Electronic ignition (CDI) |
| Transmission | 5-speed constant mesh |
| Front Suspension | Telescopic, coil spring, oil damped |
| Front Tire | 90/90-21 |
| Rear Tire | 120/90-17 |
| Curb Weight | 166 kg (366 lbs) |
| Final Drive | Chain |
| Lubrication | Wet sump |
| Engine Type | 4-stroke, air-cooled, SOHC |
| Fuel System | Mikuni BST40 carburetor |
| Rear Suspension | Link type, coil spring, oil damped |
| Front Brakes | Disc brake |
| Rear Brakes | Disc brake |
| Fuel Tank Capacity | 13.0 liters (3.4 US gallons) |
| Overall Width | 865 mm (34.1 in) |
| Overall Height | 1195 mm (47.0 in) |
| Wheelbase | 1490 mm (58.7 in) |
| Ground Clearance | 265 mm (10.4 in.) |
| Seat Height | 885 mm (34.8 in) |
| Overall Length | 2255 mm (88.8 in) |
A detailed chart outlining recommended intervals and tasks for periodic maintenance and tune-ups.
Instructions on how to check and adjust valve clearance, including necessary measurements and procedures.
Maintenance procedures for the braking system, including checking brake fluid levels and brake pads.
Step-by-step procedures for safely removing and reinstalling the engine from the motorcycle.
Procedures for crankshaft reassembly, measuring web width, and mounting into the crankcase.
Detailed procedures for the disassembly and reassembly of the transmission gears and shafts.
Description and inspection procedures for the ignition system, including magneto coil and ignition coil.
Specifications, initial charging, and servicing procedures for the motorcycle battery.
Exploded view and torque specifications for the front brake system, including pad replacement.
Detailed procedures for the removal, disassembly, inspection, and reassembly of the front fork.
Exploded view and torque specifications for the rear brake system, including pad replacement.
A comprehensive guide to diagnosing and resolving common problems across engine, chassis, and electrical systems.
To Next Page