Suzuki DR600S - Engine Removal and Remounting

SERVICING
ENGINE
3-2
ENGINE
REMOVAL
AND
REMOUNTING
ENGINE
REMOVAL
Before taking the engine out of the frame, thor-
oughly clean the engine with a suitable cleaner.
The procedure of engine removal is sequentially
explained in the following steps.
e Remove the left and right frame covers by
removing the screws.
e
Remove
the
seat
by
removing
the
bolts
from
both
sides.
e@
Disconnect
the
battery
©
and
@lead
wires
from
the
battery
terminals.
CAUTION:
Be
sure
to
disconnect
the
©
lead
wire
first.
e
Turn
the
fuel
cock
to
OFF
position
and
shift
the
fuel
hose
clip
sideways
and
disconnect
the
fuel
hose
from
the
fuel
cock.
e@
Remove
the
two
bolts
at
the
rear
of
the
fuel
tank
and
draw
the
fuel
tank
backward.