Suzuki GA413 - Transfer Case

7A1-8 MANUAL TRANSMISSION (4WD)
UNIT REPAIR OVERHAUL
TRANSFER CASE
Disassembly
1) Remove engine rear mounting.
2) Remove speed sensor (1).
3) Remove bolts and separate transfer rear case (1) from transfer
front case (2) using special tool.
Special Tool
(A): 09912-34510
4) Using special tool, remove circlip (1) and then speedometer
sensor rotor (2).
Special Tool
(A): 09900-06107
5) Remove circlip and then output shaft rear bearing (1) by using
special tool.
Special Tool
(A): 09913-65135