Suzuki GA413 - Front Door Lock

REMOVAL
1) Raise window all the way up.
2) Remove window regulator handle (if equipped), door inner gar-
nish, door trim, power window switch (if equipped), door sealing
cover and door rear sash (refer to FRONT DOOR GLASS AND
WINDOW REGULATOR REMOVAL).
3) After disconnecting each joint of control link and connector of
door lock actuator, remove door outside handle and door latch
ass’y.
1. Door latch
2. Outside handle
3. Retainer
4. Key cylinder
BODY SERVICE 9-5
FRONT DOOR LOCK
1. Outside handle
2. Lock key cylinder
3. Inside handle
4. Latch assembly
5. Latch striker
6. Inside look knob
7. Door lock actuator (if equipped)
Tightening torque:
(a): 5.5 N·m (0.55 kg-m, 4.0 lb-ft)
(b): 10 N·m (1.0 kg-m, 7.5 lb-ft)
[A]: Without power door lock
[B]: With power door lock