ENGINE MECHANICAL (RHZ ENGINE) 6A3-25
8) Install front differential housing according to installation proce-
dure described in Section 7E.
9) Refill front differential housing with gear oil, referring to Section
7E.
10) Install steering gear box to vehicle referring to Section 3B1.
11) Install oil level gauge.
12) Refill engine with engine oil, referring to item “ENGINE OIL
CHANGE” in Section 0B.
13) Refill power steering system with specified fluid referring to
Section 3B1.
14) Check to make sure that there is no engine oil leakage, differ-
ential oil leakage and power steering fluid leakage at each con-
nection.
To Next Page
Loading...
Need help?
General
