2-85
BEFORE DRIVING
80SS5-01E
Distance unit
(Vehicle speed / Odometer / trip meter /
driving range / average speed distance unit
setting)
You can change the units in which odome-
ter / trip meter / driving range / average
speed distance is displayed.
Fuel economy
(Fuel consumption unit setting)
You can change the units that fuel con-
sumption is displayed in.
Language
You can change the language of the infor-
mation display.
Fuel reset
(Average fuel consumption reset setting)
You can change when the value of aver-
age fuel consumption is reset.
Temperature
(Temperature unit setting)
You can change the units that temperature
is displayed in.
• To change the temperature unit, select
“Temperature” in “Setting mode”. Then,
select “°C” or “°F”.
NOTE:
When you change the units that tempera-
ture is displayed in, the automatic heating
and air conditioning system (if equipped)
temperature display units will be changed
automatically.
Clock setting
(Adjusting the clock)
• Adjust the clock by selecting “Clock set-
ting” in “Setting mode”. Then, select
“Adjust clock”.
• To change the hour indication, turn the
indicator selector knob (3) left or right
repeatedly when the hour indication
appears as reversed color. To change
the hour indication quickly, turn and hold
indicator selector knob (3). To set the
hour indication, push the indicator selec-
tor knob (3) and the minute indication
appears as reversed color.
• To change the minute indication, turn the
indicator selector knob (3) left or right
repeatedly when the minute indication
appears as reversed color. To change
the minute indication quickly, turn and
hold indicator selector knob (3). To set
the minute indication, push the indicator
selector knob (3).
(Selecting 12H/24H format)
• Switch the time indication between 12-
hour and 24-hour format by selecting
“Clock setting” in “Setting mode”. Then,
select “12H” or “24H”.
Door lock
(Door unlock setting) (if equipped)
You can choose either once or twice oper-
ation(s) to unlock all doors (including the
tailgate) by turning the key, or operating
the keyless entry system transmitter, key-
less push start system remote controller or
request switch.
You can also turn off or on the buzzer
sound when the door(s) is (are) locked or
unlocked.
Lights
(Lane change setting)
The turn signal and its indicator can be set
whether they flash three times even if you
return the turn signal control lever shortly
after operating it.
• To change the lane change setting,
select “Lane change” in “Setting mode”.
Then, select “ON” or “OFF”
• If you want to change the number of
flashing, consult an authorized SUZUKI
dealer.