2-103
BEFORE DRIVING
80SS5-01E
Average fuel consumption /
5-minute average fuel consumption /
1-driving cycle average fuel consump-
tion
Average fuel consumption from previous
reset and 5-minute average fuel consump-
tion, and 1-driving cycle average fuel con-
sumption are shown.
(Average fuel consumption)
52RM21080
(5) Average fuel consumption
If you selected average fuel consumption
the last time you drove the vehicle, the dis-
play shows the last value of average fuel
consumption from previous driving when
the ignition switch is turned to “ON” position
or the engine switch is pressed to change
the ignition mode to ON. Unless you reset
the value of average fuel consumption, the
display indicates the value of average fuel
consumption based on the average fuel
consumption during previous driving.
NOTE:
When you reconnect the negative (–) ter-
minal to the lead-acid battery, the value of
average fuel consumption will be shown
after driving for a period of time.
You can select the timing to reset the value
of average fuel consumption by one of the
following three methods;
• Reset after refuel: the value of average
fuel consumption will be reset automati-
cally by refueling.
• Reset with trip meter A: the value of
average fuel consumption will be reset
automatically by resetting trip meter A.
• Reset manually: the value of average
fuel consumption will be reset by push-
ing and holding the indicator selector
knob (3) when the display indicates the
average fuel consumption.
To change the timing to reset the value of
average fuel consumption, refer to “Setting
mode” in this section.
NOTE:
If you add only a small amount of fuel
when you select “Reset after refuel”, the
average fuel consumption value may not
be reset.
(5-minute average fuel consumption)
68PM00282
(6) 5-minute average fuel consumption
(
1-driving cycle average fuel consumption
)
52R30840
(7) 1-driving cycle average fuel con-
sumption
(5)
(5)
To Next Page
Loading...
Need help?
General
