2-137
BEFORE DRIVING
80SS5-01E
Dual sensor brake support indica-
tor light (if equipped)
52RS20310
When the ignition switch is turned to “ON”
position or the engine switch is pressed to
change the ignition mode to ON, this light
comes on briefly so you can check that the
light is working.
When the automatic brake system is acti-
vated, this light blinks rapidly.
In the following situations, this light will come
on and the dual sensor brake support will
stop functioning when the ignition switch is
in “ON” position or the ignition mode is ON.
When the dual sensor has failure, the func-
tion of the dual sensor stops until the igni-
tion switch is turned to “LOCK” position or
the engine switch is pressed to change the
ignition mode to LOCK (OFF). Find a safe
place to park and turn the ignition switch to
“LOCK” position or change the ignition
mode to LOCK (OFF) by pressing the
engine switch. Restart the engine, and
check that the dual sensor brake support
indicator light and lane departure warning
indicator light go off.
• If both of the indicators stay on after
restarting the engine, there may be a
failure of the dual sensor. Ask an autho-
rized SUZUKI dealer to have the dual
sensor inspected.
Under the following situations, the function
of the dual sensor stops temporarily. When
the situations are improved, the temporary
stop of the function will be canceled.
• When the visibility of the dual sensor is
poor.
• When the temperature of the body of
dual sensor is high.
• When the systems related to the dual
sensor brake support stop temporarily.
• When the battery has a voltage abnor-
mality.
For details, refer to “Dual sensor brake
support (if equipped)” in “OPERATING
YOUR VEHICLE” section.
Dual sensor brake support OFF
indicator light (if equipped)
52RS20320
When the ignition switch is turned to “ON”
position or the engine switch is pressed to
change the ignition mode to ON, this light
comes on briefly so you can check that the
light is working.
In the following situations, this light will come
on and the dual sensor brake support will
stop functioning when the ignition switch is
turned to “ON” position or the ignition mode
is ON.
• When the dual sensor brake support
OFF switch is pushed and held to turn
off the dual sensor brake support.
• When the ESP
®
OFF switch is pushed to
turn off the ESP
®
systems (other than
ABS), the ESP
®
OFF indicator light will
also come on.
For details, refer to “Dual sensor brake sup-
port (if equipped)” in “OPERATING YOUR
VEHICLE” section.
To Next Page
Loading...
Need help?
General
