3-50
OPERATING YOUR VEHICLE
80SS5-01E
ENG A-STOP OFF switch
The ENG A-STOP system can be deacti-
vated.
• To deactivate the system, press the ENG
A-STOP OFF switch (1) to turn on ENG
A-STOP OFF light (2).
• To activate the system once again, press
the switch (1) again to turn off the indica-
tor.
• Every time the engine is stopped manu-
ally, the system is enabled again and the
ENG A-STOP OFF light (2) goes off.
52RM30170
NOTE:
Pressing the ENG A-STOP OFF switch (1)
during the automatic engine stop will
restart the engine automatically and the
ENG A-STOP OFF light (2) will come on.
ENG A-STOP OFF light
52RM30460
This indicator comes on in the information
display.
• This indicator comes on when the ENG
A-STOP system is deactivated.
• The indicator blinks when the ignition
switch is turned to “ON” position or the
engine switch is pressed to change the
ignition mode to ON, if one of the condi-
tions listed below is met.
The ENG A-STOP system or the SHVS
system does not actuate correctly while
the indicator is blinking. Have the system
inspected by an authorized SUZUKI
dealer.
– There may be something wrong with
the ENG A-STOP system or the SHVS
system.
– An engine component (ISG) or the
lead-acid battery is due for replace-
ment.
NOTE:
If the indicator blinks during the automatic
engine stop, the engine may shut down.
(2)
(1)
To Next Page
Loading...
Need help?
General
