3-62
OPERATING YOUR VEHICLE
80SS5-01E
Conditions to stop the engine automatically
If all of the following conditions are met while the standby conditions are met, the engine is stopped automatically when the vehicle is
decelerating before stopping or when the vehicle is stopped.
When decelerating
before stopping
• The ABS or ESP
®
system has not been activated.
• Brake booster vacuum pressure is normal.
• The clutch pedal is depressed, the gearshift lever is shifted into “N” position, and then the clutch pedal is
released when the vehicle speed is approximately 15 km/h (9 mph) or less.
When the vehicle is
stopped
• The ABS or ESP
®
system has not been activated.
• Brake booster vacuum pressure is normal.
• The gearshift lever is in “N” position.
• The clutch pedal is released.
To Next Page
Loading...
Need help?
General
