3-88
OPERATING YOUR VEHICLE
80SS5-01E
NOTE:
When the function of the dual sensor is
temporarily stopped or malfunctioning, all
the following functions will be turned off.
• Dual sensor brake support
• Lane departure warning
• Vehicle swaying warning
• High beam assist
Temporary stop of the dual sensor
Under the following situations, the function
of the dual sensor stops temporarily.
When the situations are improved, the tem-
porary stop of the function will be canceled.
• When the visibility of the dual sensor is
poor
Refer to “Situations where the dual sen-
sor may not activate properly” in this
section for details.
• When the temperature of the body of
dual sensor is high
• When the systems related to the dual sen-
sor brake support are stopped temporarily
• When the lead-acid battery has a volt-
age abnormality
Failure of the dual sensor
When the dual sensor has failure, the func-
tion of the dual sensor is stopped until the
ignition switch is turned to “LOCK” position
or the engine switch is pressed to change
the ignition mode to LOCK (OFF).
Find a safe place to park and turn the igni-
tion switch to “LOCK” position or change
the ignition mode to LOCK (OFF) by press-
ing the engine switch.
Restart the engine, and check that the dual
sensor brake support indicator light and
lane departure warning indicator light, and
high beam assist warning light go off.
• If all of the indicators stay on after
restarting the engine, there may be a
failure of the dual sensor. Ask an autho-
rized SUZUKI dealer to have the dual
sensor inspected.
NOTE:
• Under the following situations, the dual
sensor brake support indicator light, lane
departure warning indicator light, and
high beam assist warning light come on
after the engine has been started, it does
not indicate a malfunction. Once the igni-
tion switch is turned to “LOCK” position
or the engine switch is pressed to
change the ignition mode to LOCK
(OFF) and then the engine is restarted,
these indicators will go off.
– When the automatic brake system
operates 3 times
– When the automatic brake system
operates for a long period
• The function of the dual sensor is
stopped if the dual sensor brake support
indicator light, lane departure warning
indicator light, and high beam assist
warning light come on and there may be
a failure of the dual sensor, but it does
not hinder normal driving.
Pedestrian detection
The dual sensor detects pedestrians by
whose size, shape or motion.
75RM238
(1) About 1 – 2 m (3.3 – 6.6 ft)
WARNING
Even when the detection conditions
are satisfied, not all pedestrians may
be detected by the dual sensor.
In the following situations, there is a
high possibility of no detection or
delay of detection. Always drive in a
safe manner.
• A person who walks in a group
• A person who walks beside a wall
or another obstacle
• A person who has an umbrella up
• A person whose color is similar to
the background and who is
blended into the scenery
(Continued)
To Next Page
Loading...
Need help?
General
