3-123
OPERATING YOUR VEHICLE
80SS5-01E
How to use parking sensor
Parking sensor switch
66RH120
(1) Parking sensor switch
(2) Indicator
• When the ignition switch is in the “ON” position or the ignition mode is ON and the indi-
cator light in the parking sensor switch is on, indicating that the parking sensor is ready
for operation under the following condition:
– The gearshift lever is in the “R” position.
• To deactivate the parking sensor, push the parking sensor switch and check that the
indicator light goes off.
NOTE:
If you push the parking sensor switch from OFF to ON position when the ignition switch is
in the “ON” position or the ignition mode has been changed to ON by pressing the engine
switch, the interior buzzer sounds.
Switch position State
EXAMPLE
ON
• When the indicator light is on and all necessary conditions are
met, system becomes ready for operation.
EXAMPLE
OFF
• The system does not operate. Push the switch to turn off the
indicator if you do not wish to use the parking sensor.
To Next Page
Loading...
Need help?
General
