Suzuki SWIFT 2022 Series - Page 349

5-13
OTHER CONTROLS AND EQUIPMENT
80SS5-01E
To install the hook (1), follow the proce-
dure below.
52RM50170
1) Pick up the towing hook (1), jack handle
(A) and wheel wrench (B) in the lug-
gage compartment.
Except for sport model
80SM115
For sport model
52RM213
2) Remove the cover (C) by using a jack
handle (A) covered with a soft cloth as
shown in the illustration.
• For sport model, the cover (C) is
divided into two pieces. After remov-
ing one cover by using a jack handle
(A) covered with a soft cloth, remove
the remaining cover by hand.
NOTE:
Do not use excessive force as it may dam-
age the cover strap.
80SM116
3) Install the towing hook (1) by hand.
NOTE:
It is recommended to secure the cover with
tape to prevent damage during towing.
（
1
）
（A）
（B）
EXAMPLE
(A)
(C)
EXAMPLE
(A)
(C)
(1)
EXAMPLE