5-32
OTHER CONTROLS AND EQUIPMENT
80SS5-01E
52D275
To remove the compact disc from its stor-
age case, press down on the center of the
case and lift the disc out, holding it care-
fully by the edges.
Always handle the compact disc by the
edges.
Never touch the surface.
52D347
To remove fingermarks or dust, use a soft
cloth, and wipe in a straight line from the
center of the compact disc to the edge.
52D277
New discs may have some roughness
around the edges. The unit may not work
or the sound may skip if such discs are
used. Use a ball-point pen (B), etc. to
remove the roughness (C) from edges of
the disc before inserting it into the unit.
52D348
Never affix labels on the surface of the
compact disc or write on the surface with a
pencil or pen.
52D349
Do not use any solvents such as commer-
cially available cleaners, anti-static spray,
or thinner to clean compact discs.
Removing the disc
Proper way to hold
the compact disc
To Next Page
Loading...
