5-55
OTHER CONTROLS AND EQUIPMENT
80SS5-01E
AUX function
52RS50151
(1) “MEDIA” button
AUX connection
To listen to auxiliary audio sources (sold
separately) through the unit, follow the
instruction below.
1) Connect the auxiliary audio source to
the AUX/USB socket (separately
attached) with an AUX cable.
2) Press “MEDIA” button (1).
Each time the button is pressed, the
mode will change as follows:
CAUTION
• Before connection, mute the unit,
and also keep the volume of the
auxiliary audio source within a
range that will not cause distortion.
• When the audio source is turned
off, noise may be emitted. Be sure
to turn off the unit or switch to
another mode before turning off the
audio source.
USB (iPod) (if equipped)
Bluetooth
®
audio (if equipped)
AUX (if equipped)
To Next Page
Loading...
